Peanut Butter Fudge (Microwave Recipe, 4 Ingredients!) (2024)

FAQs

Why won t my microwave fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

While melting peanut butter in the microwave requires minimal effort, it is important to stir your spread every 30 seconds when you take it out. Peanut butter can burn quickly since it doesn't contain much water, and you'll want to make sure it doesn't stick to the bottom of your bowl.

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer). If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

If you don't heat your fudge to a high enough temperature, you'll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you'd like.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Should you stir fudge while it's cooking? ›

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again.

If it doesn't boil, your fudge will end up too mushy, and if it cooks for too long, you'll end up with a dry, crumbly mess. This is why many recipes recommend using a candy thermometer, so you know exactly when to remove your mixture from the heat.

Microwave on high for 30 seconds.

Cover the bowl with a microwave-safe lid or paper towel to avoid messy splatters. Use a timer to make sure you remove the bowl after 30 seconds to prevent burning. It's best to use pot holders to take the bowl out of the microwave safely.

Yes, melt it. Just scoop a few tablespoons into a microwave-safe bowl, and nuke for 15 second intervals until it reaches a warm, sauce-like consistency. Then comes the real fun. You can pretty much eat it any way you'd like, but we listed eight of our favorite uses for melted peanut butter below.

According to the National Peanut Board, unopened, commercially processed peanut butter lasts for up to 9 months in the pantry, while opened conventional peanut butter lasts up to 3 months in the pantry and up to 9 months in the refrigerator.

Solutions to Save Your Fudge:

You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.